oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Aussie (http://www.oople.com/forums/forumdisplay.php?f=55)
-   -   Troubleshooting: DB01 (http://www.oople.com/forums/showthread.php?t=56044)

Miguel 23-10-2010 07:22 AM

Troubleshooting: DB01
 
Hi Guys,
I'm a newbie and just bought and assembled a new Durga DB01 and I'm running a Yeah Racing brushless 10T with tamiya slipper clutch and Lipo.

My first 2 test runs were brilliant, the car flew and I started tweaking the camber and steering angles and generally I was having a great old time.

However after my 3rd run in a gravel car park and then on smooth dirt surface the transmission started making a clicking noise so I stopped driving. :(

I took the spur gear cover and gearbox covers off to inspect but nothing looked out of the ordinary. I took the opportunity to tighten the drive belt tension by 1 click and applied a bit more grease to the diffs.

I then took it for a run and now the clicking has almost disappeared but now the drive isn't going to the wheels 100%. It's as if the motor is spinning hard but the car is only travelling at about 20% full speed. I thought it would be something to do with the slipper clutch so I've tried it on a variety of adjustments but nothing seems to work.

Please help, very frustrated don't what to do from here...

cheers,

Miguel

Fat Corgi 27-10-2010 10:10 AM

Have you inspected the differentials? Most transmission problems occur there in that car, especially with a higher power motor.


All times are GMT. The time now is 05:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
oOple.com