Which has the better front end, DIMEC metal +8?
Hi, Change from losi 22 to the dex210 (v1.5 ish) and have struggled with lack of front end especially on corner exit when grip comes up.
I'm running the Dimec version B +8 chassis and wondering if anyone has compared it to the +8 metal chassis and if the front end any better with it? |
I found that the standard type B DIMEC chassis can flex too much on higher grip surfaces, affecting the handling handling particularly during cornering. Depending on how high the grip is, I would recommend the Type B DIMEC20 or Aluminium chassis.
|
Great thanks, think that is exactly what i am experiencing. Car handles well in low grip but when grip comes up is very vague.
|
You can also try a bit less front droop for more on power steering
|
For the sake of anyone else with these issues a +8 metal chassis and a -2mm lrc rear block gave me an extra lap and half on quite a big track so a massive improvement.
|
All times are GMT. The time now is 03:49 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com