Hot Bodies cyclone/Sprint/Tcx (parts interchange or upgrades)
 

Hi there I have and race a Hot bodies cyclone Wce and was wondering if there were any other cars out there that the parts are interchangeable with the cyclone, Like the turnbuckle arm to get rid of some of that slop.:thumbsup:

On the Cyclone you can use almost every part from all versions from Cyclone till Cyclone TC. Also from the TCX you can use a few parts. I'm using a Cyclone S, which i built with the best parts from the other versions: the chassis from Cyclone, the rear heatsink from WCE, the suspension and upperdeck vom TC, etc.
From HPI you can use a few parts of the Pro4, but not from Sprint/Sprin 2 (except turnbuckles and shocks). But also other brands got good parts. I use for example the blocks from Jaad Racing: http://www.redrc.net/2008/06/jaad-ra...-pivot-blocks/ and the steel MIP CVDs at the front from Corally.

I think I know the answer to this, but wanted to check with some of the more experienced amongst you; Does that mean parts of a Cyclone Black can be used on a Cyclone S?

Yep you can mix those chassis. Can even use the lower bulkheads from the Cyclone S and the upper bulkheads from the TC.

Thanks very much.