65.5mm Drive Shafts Anyone ??
 

All,

Im looking for some driveshafts that are 65.5mm in length, they need to be the same type as these on the link below and are for a 10th scale car...

http://www.hpiracing.co.uk/piw.php?partNo=61472

Anyone got any ideas to save me time measuring them all ??

All help appreciated

Lee

Kyosho do some at that lenght for the RB5 i think

Kyosho shafts are 65.5 mm but have the cup on the shaft, not the axle which i think it what lee is after.

But i guess you could just use a full shaft and axle from kyosho :)

Could possibly use there complete shafts...

Do you know what diameter bearing the axle fits in, I could do with it being the same as the D4 bearing which is 5x10x4 if I am to use them or then I would have to use the Kyosho hubs as well which sort of defeats the object :blush:

Just found the RB5 SP2 manual, looks like they are the same so will see if I can borrow some to test...

Cheers Both :wub

Lee

Panch, I have a set you can borrow if you need to, just give me a shout :)