HPI Flux PRO Motors
 

http://www.hpieurope.com/graphics/pa...101727_01x.jpg

Tested and developed by the HPI/HB race team over the past year the all new motor from HPI/HB has arrived and has been shipped this week :thumbsup:

Legal for BRCA use now!

Motors RRP for £64.98

Available in the following winds 3.5T, 4.0T, 4.5T, 5.0T, 5.5T, 6.5T, 7.5T, 8.5T, 10.5T, 13.5T, 17.5T and 21.5T

We have 5 rotors available for all classes and possible conditions 12.2mm, 12.5mm (STD), 12.8mm 13.0mm and 13.5mm. All BRCA legal from now! Although with the Stock motors you can only use the optional 12.2mm as regs state nothing bigger than 12.5mm which is included as std.

http://www.hpieurope.com/graphics/pa...101822_01x.jpg

We also have a unique attachable fan for inside the motor :drool: This secures via 2 grub screws onto the rotor and will kep internal temperatures down without any noticeable power change, very useful for high demand stock motors, will be BRCA legal when they arrive with us in a few weeks (around end of April). Very light and cool (pardon the pun)

Motors come with colour printed box, manual, 200mm sensor cable (black), extra metal shims for rotor spacing (no O-rings here!!) and colour decal sheet for the extra bit of bling.

Available from all good model shops now :thumbsup:

Extra Information

101723 Flux PRO 3.5T Competition Brushless Motor12.5mm Rotor / 8900KV / 65860 RPM / 713W / 88% Efficiency / High Speed Bearings
101724 Flux PRO 4.0T Competition Brushless Motor12.5mm Rotor / 7800KV / 57720 RPM / 656W / 90% Efficiency / High Speed Bearings
101725 Flux PRO 4.5T Competition Brushless Motor12.5mm Rotor / 7000KV / 51800 RPM / 610W / 90% Efficiency / High Speed Bearings
101726 Flux PRO 5.0T Competition Brushless Motor12.5mm Rotor / 6450KV / 47730 RPM / 541W / 91% Efficiency / High Speed Bearings
101727 Flux PRO 5.5T Competition Brushless Motor12.5mm Rotor / 5870KV / 43440 RPM / 483W / 91% Efficiency / High Speed Bearings
101728 Flux PRO 6.5T Competition Brushless Motor12.5mm Rotor / 5050KV / 37370 RPM / 449W / 91% Efficiency / High Speed Bearings
101729 Flux PRO 7.5T Competition Brushless Motor12.5mm Rotor / 4400KV / 32560 RPM / 391W / 92% Efficiency / High Speed Bearings
101730 Flux PRO 8.5T Competition Brushless Motor12.5mm Rotor / 3850KV / 28490 RPM / 322W / 92% Efficiency / High Speed Bearings
101731 Flux PRO 10.5T Competition Brushless Motor12.5mm Rotor / 3120KV / 23088 RPM / 282W / 92% Efficiency / High Speed Bearings
101732 Flux PRO 13.5T Competition Brushless Motor12.5mm Rotor / 2450KV / 18130 RPM / 234W / 93% Efficiency / High Speed Bearings
101733 Flux PRO 17.5T Competition Brushless Motor12.5mm Rotor / 1900KV / 14060 RPM / 156W / 93% Efficiency / High Speed Bearings
101734 Flux PRO 21.5T Competition Brushless Motor12.5mm Rotor / 1550KV / 11470 RPM / 120W / 93% Efficiency / High Speed Bearings

As used by Craig Collinson and Nathan Ralls to rack up some serious results over the past couple of months :thumbsup:

All details can be found on HPI Racing UK website :woot:

ESC info to follow in a while ......... ;)

Other spares and options are available:
#101809 Sintered 12.2mm rotor
#101810 Sintered 12.5mm rotor (Std.)
#101811 Sintered 12.8mm rotor
#101812 Sintered 13.0mm rotor
#101813 Sintered 13.5mm rotor
#101814 Sensor Wire 80mm
#101815 Sensor Wire 120mm
#101816 Sensor Wire 200mm
#101817 Front Cover With Bearing (Black)
#101818 Sensor Back cover With Bearing (Black)

I'll bet the esc will be a Castle sidewinder sv2:thumbsup:

Care for a wager?? :woot:

it'll be something from Castle creations, surely?

Damn they looked cool think i have to get one just because of that ....


mvh Isobarik

HPI flux pro motors are now in stock! :thumbsup:

MB Models have them in stock and listed on their website:

http://www.rccarshop.co.uk/catalog/index.php?cPath=23

Take a look at the price, absolute bargain!

Craig

I note the HPI Flux Q-base is a rebadged MMP - that's not a bad speedo! Nice price too at Modelsport.

The Sidewinder V2 doesn't appear to be sensored, so maybe something else?

Anyone know who is stocking these motors? Particularly HPI Flux PRO 7.5T

Going by Craig's post 2 above yours Mikey, MB Models are;)

Don't list 7.5 on their site.

JE Spares

http://www.jespares.com/electric-mod...tegory_id=1274

Unfortunately 7.5t out of stock at the minute but give them a ring and see when available

Tried that :( everyone must be enjoying the long break..

Running a 7.5 and 6.5 V3 at the mo, but want to change to HPI. How much of a like for like is there, i.e. is a 6.5 HPI going to be like a V3 5.5? Spending a fair amount of ££ and don't want to land the wrong motor..

ask craig collingson. hes the man in the know and im sure he would be able to answer all your questions hes the hulk on here :thumbsup:

Guys,

Apologies for not picking this up sooner, I have been away !! :thumbsup:

It looks like these are due into us in the first week or so of May, If you want any of them get your local shop to get one on back order straight away as demand is very high and we already have quite a few accounted for :thumbsup:

We wouldnt want you to miss out ;)

I have just ordered myself a HPI Flux 5.5 to go in my new car! :thumbsup:

But what kind of car is a secret....:woot:

SX3 ;)

A rock crawler knowing your lines :woot: