oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   X-Factory (http://www.oople.com/forums/forumdisplay.php?f=16)
-   -   Setups (http://www.oople.com/forums/showthread.php?t=548)

Gayo 20-06-2007 12:57 PM

Thanks for the explanations. I will try it soon on my club track (astro, tight layout).
Can I call you Super ? ;)

C U in Belgium !

Cheers,
Raphael

Kusal 20-06-2007 08:27 PM

Hi Dan,
Any possibility to get a picture of the X6 rear camber link flipped low?
Thanks

bigred5765 03-09-2007 01:09 PM

x5 and x6 junoirs set ups from silverstone
 
======

Lee 03-09-2007 06:21 PM

Quote:

Originally Posted by bigred5765 (Post 59436)
hope these are of some use to someone
x5 silverstone
x6 silverstone

If you ever decide to race on the moon because i dont think silverstone will be used for a while:D

bigred5765 03-09-2007 06:51 PM

lol so true lee, i seen smoother farmers fields lol

bigred5765 18-09-2007 11:24 AM

+++++

super__dan 18-09-2007 04:37 PM

I know Chris is getting an X5, is he considering an X6 too?

Lee 21-09-2007 03:44 PM

Chris was super happy with the way the x6 went, i think he will have one before long.

Here is my setup as promised:

Front:

Silver springs, 35wt ae oil ,losi red piston. 2spacers internal.
camber link inside on hub and shocktower mounting position.
-1 deg camber
0 deg toe in/out
30 deg caster blocks
shock pos. middle hole on tower inside on wishbone
outer row of spikes off front tyres

Rear:

silver spring 30wt ae oil, losi red piston.
camber link outer hole inboard and outside on the hub
0 deg anti squat (2 thick spacers)
.009 shims under gearbox
shock pos. 2nd hole from inside on tower middle on wishbone.
short wheelbase on hub and wishbone
-1 deg camber
wing forward as far as possible

no extra weight added.

Lee

bigred5765 15-01-2008 07:33 PM

+++++

Doomanic 26-01-2008 06:07 PM

Has anyone got a good X-5 set up for Coventry's astro?
Bit short notice I know...:rolleyes:

jasonrcb 26-01-2008 06:45 PM

dom use the same set up as your xx4 shut your eyes and hope for the best :D

paulo 03-04-2008 07:33 PM

Help Required
 
HI

I am looking for some advise on what gearing to run my x5 squared on for this weekend at our first regional and also the first time with this car in anger as so far I have only been able to is make sure it works

I'm running a 10x2 peak vantage motor with a Novak GTX speedo
The car has got a 104 tooth spur.

The track is astroturf and is being held at the Eastracks if this helps.

Many thanks in advance.

bigred5765 03-04-2008 10:26 PM

start around 18 and go up to 21-22 may be depending on the track keep a eye on the heat of the speedo

super__dan 04-04-2008 08:08 AM

Actually when I ran brushed I was rarely on anything higher than a 17-18. Defo start at the bottom end of the range and work up.

SHY 13-05-2008 02:28 PM

Vaasa, Finland (last Euros)
 
Ellis, could you be so kind as to post your setups for the X-6 and X-5 from this track?

We have the Nordic Championship there in june...

Big E 13-05-2008 04:00 PM

4 Attachment(s)
Here you go Shy, but my set ups are way different now as I have learnt a lot more about the cars since.

I have put them in but also how I have been running the cars recently that to be honest I would be tempted to try first if I was to go there again.

E.

Arn0 13-05-2008 09:53 PM

My bad! Delete!

SHY 14-05-2008 12:34 PM

Ellis, thank you so much for your help! :thumbsup:

Big E 14-05-2008 02:12 PM

No problems;)

SHY 15-05-2008 07:09 PM

Ellis, was this the tires allowed also for the EC?

2WD Modified Rear:
  • Pro-Line Hole Shot LP (#8184)
  • Schumacher Mini-Pin (U6602)
4WD Modified Rear:
  • Pro-Line Hole Shot LP (#8184)
  • Schumacher Mini-Pin (U6602)


All times are GMT. The time now is 07:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com