show your blast s10
 

come on you guys with s10's show em off, have you got a nice tidy electric install or custom parts even different shells

ill start with mine its got a 5.5t ezrun on a 15t pinion and flysky reciever
only mod really is the metal lrp hex
used fasttrax dish wheels front and rear
also had a go at making a few custom parts
the front shock tower is homemade
a centre top deck although the material is not strong it was made more for a template same with the battery bar soon gonna be made from something more suitable
rear mud guards from a spare bit of lexan
and a homemade vac formed wing as the original shattered in to a million pieces after the first roll over

future mods different body thinking of the associated b44 original or bulldog proline
and i new mold for different shaped wing i kinda like the look of the ftx vantage one

http://img3.imageshack.us/img3/4458/imag0354f.jpg
Uploaded with ImageShack.us

http://img339.imageshack.us/img339/504/imag0374b.jpg
Uploaded with ImageShack.us

http://img9.imageshack.us/img9/5272/imag0297p.jpg
Uploaded with ImageShack.us

This is mine.
https://lh6.googleusercontent.com/-Y...8/File0001.jpg

Upgrades:-
Turnigy Trackstar 60a ESC
https://lh5.googleusercontent.com/-7...8/File0002.jpg
13T 3000KV etronix brushless motor
https://lh6.googleusercontent.com/-U...8/File0004.jpg
5000maH Zippy LiPo
https://lh5.googleusercontent.com/-7...8/File0002.jpg
XT60 connectors
Hobbyking GT2 transmitter and receiver
https://lh3.googleusercontent.com/-l...8/File0003.jpg

All in all, when it goes it's a good car, but the brushless upgrade does seem to put a lot more strain on some components, mainly the spur gear and motor mount.

Plus, I've had the traditional troubles with the front left steering knuckle.

since the first post ive added some homemade carbonfibre parts the top deck and battery bar
http://img59.imageshack.us/img59/1715/imag0396e.jpg
Uploaded with ImageShack.us

next to do will be the rest of the top deck and shock towers

Looks like it's just the two of us willing to show our cars. :thumbdown:

I've also found that quite a few parts for the FTX Carnage fit the Blast, namely the whole slipper clutch assembly plus a few others look likely to fit.

FTX Spur gears (65t) are £1.99, slipper pads (or gaskets as they are referred to) are the same price, so just under £4 together, as opposed to nearly £11 for the LRP ones. :thumbsup:

that a very good find there is the ftx spur gear a 48dp or the mod .6 like the original blast

It's mod.6, like the original.

I ordered a complete slipper clutch assembly, including spur gear, pads and plates and it was £8.99. As opposed to 19.99 for the LRP one, and they're both the same.

Here's a full listing for the FTX Carnage truggy, with pictures so you cna get a better look at what'll fit.

http://www.freeprawnracing.co.uk/ele...hopups/carnage

My blast mt
 

.. :p

Blast2 converted to 2WD and to run with shorty Lipos.

New shell...

What shell is that? My stocker is looking a little worse for wear after I took my BX racing last.

Mine!! :thumbsup:

http://img.tapatalk.com/d/14/05/02/o...l/a6y2y6yj.jpg