Anyone remember Brimod shocks?
 

On my "yet to be restored" Optima, I have some after market shocks made by Brimod. They were a popular purchase for folks with Optimas at Kiddy club but I can't find any mention of them on the 'net.

I'm wondering if it was a small local company??

Thankfully I have a few spares to get them working well again.

I guess no-one does. I'll get some pics up here one day when I start my restoration.

Brimod Engineering Developments Ltd were a small engineering company based in Wolverhampton, known mainly in the r/c world for their best shocks you could buy. They did produce the Brimod Bullet and Talisman Pro 10 chassis, as well as replacement driveshafts, UJs and pivot pins. They closed down in 1991, most likely due to the manufacturers having caught up with their designs.

Wow i had a set of these !
I bought them and fitted them to the rear of my optima in the mid eighties.
I loved the look of them .. proper engineering , machined from alloy with a bleed grub screw at the top?
Mine leaked after a good use but i loved them .
If i can recall they cost me roughly 22.95 back in 87/88 which when i was 16 , 17 was a lot of money for me!

So it's not just me then. I remember my uncle joking that he could have bought a set of shock for his proper car for not much more money.

I'll see if I can get some pics up tonight.

Coincidentally, I noticed a small article in an old RRC mag announcing their new shocks for the PB Mini Mustang last night.

I used to have a few sets of Brimod dampers on my mini mustangs they were far better than the original kit ones. I have some pics somewhere.

I had a set of Brimod shocks on one of my cars think it was an optima, got them when on holiday, from a big shop in Edinbourgh many many years ago. They were great.......and huge!!

This is a pic of my old mini mustang with brimod shocks all round
http://i304.photobucket.com/albums/n.../2speed184.jpg

As promised here are some of my old Optima complete with Brimod shocks all round and home made motor guard. This is in the state it was put away in around 20 years ago with all the original period electronics too.

Amazingly one of the shocks still feels like it has some oil in and is working well.

Looks like someone was racing on polished wood 20 years ago.:thumbsup:

yep, and suprisingly I was the only one using foams with silicone for a couple of months. I won quite a lot of races until people realised why! Certainly the most cost effective upgrade I ever made to the car.

I have those on my Optima, but never knew what they were :thumbsup:

What are the tyres you were running?

G

They were foams from a touring car if I remember correctly. Don't know much more, it was too long ago. I rolled them in silicone bath sealer to add a stippled "sticky" layer to them. Worked a treat, I had grip where everyone else had none.

I remember running the silicone covered tyres at Kiddy indoor track in the mid / late 80's it was the only tyre to run, im sure the club had carpit just never used it.

Cheers

Rich

Just been in the loft and found a full set of Brimods, i think i may have run them on an early RC10, they are now going on my Mini Mustang once rebuilt. Now what else is in the box!!

Cheers

Rich

I think I still have a brimod chassis conversion for an optima somewhere. Oval stickers if I remember too.

i have a set of brimod shocks too, they used to live on a maxima, but were on my ace for a while

I remember them well, the kit dampers were very poor - used two metal pins to hold the lower part of the shock cartridge in. Leaked like anything!

If you could post a pic to 2, I'd like to see that. Don't think I ever saw one at the time.

Yep, oval stickers. I've got some stuck to my old stuff somewhere. Might even have some un-used ones as I have a packet of spares for the shocks.