oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   For sale (http://www.oople.com/forums/forumdisplay.php?f=237)
-   -   FOR SALE Vintage RC10 Parts. (http://www.oople.com/forums/showthread.php?t=204554)

xfactor 20-08-2019 05:31 PM

Vintage RC10 Parts.
 
SOLD.....

xfactor 20-08-2019 06:27 PM

Vintage RC10 Parts
 
1 Attachment(s)
8th Original RC10 Carbon Fibre gearbox brace.

£5.00 posted gift or cover the fees..

xfactor 20-08-2019 06:43 PM

Vintage RC10 New Parts
 
SOLD....

xfactor 20-08-2019 06:50 PM

RC10 Parts.
 
SOLD......

Martinst 20-08-2019 10:15 PM

Yes please on the 6th - nose plate

xfactor 21-08-2019 05:29 PM

Vintage RC10 Parts
 
1 Attachment(s)
NOW ON EBAY...

Dr XX 26-08-2019 03:15 PM

I'll take the stealth slipper transmission parts please (11th), pm me your paypal address.

xfactor 26-08-2019 07:23 PM

RC10 PARTS
 
SOLD.....

xfactor 30-08-2019 05:59 PM

RC10 Parts
 
SOLD....

xfactor 01-09-2019 05:19 PM

RC10 PARTS
 
SOLD.....

xfactor 04-09-2019 09:13 PM

RC10 Parts
 
SOLD.....

xfactor 05-09-2019 08:16 PM

RC10 Parts.
 
8 Attachment(s)
Marc Neale Team Associated Replica Body shell. Marc was one of the 3 drivers back in the day along with Craig Drescher and Rory Cull.

The body is a TURBO MIRAGE...

Never been used only sat on the shelf. Has a tiny body hole behind the cab for the RPM rear shock tower body mounting hole.

SOLD...…...SOLD...…...SOLD

xfactor 07-09-2019 05:07 PM

RC10 Parts
 
SOLD.....

Peakey 08-09-2019 08:55 PM

Quote:

Originally Posted by xfactor (Post 1005527)
20th.

Dynotech Klein RC10 Front and Rear wishbones. These are the copy of the RPM 91 WORLDS Wishbones for the RC10. You will see on 2 of the pictures I have sat the RPM 91 WORLDS Wishbones on top of the Klein wishbones.

1 rear has a very slight mark from where the drivepin came out the drives shaft. This will not effect the wishbone if it was to be run, Other than that they are in mint and as new condition only being used once in America.

I want £45.00 posted gift or cover the fees, for the full set.

Are these the narrow chassis arms mate?

xfactor 08-09-2019 09:08 PM

The fronts are for the RC10T truck bulkhead and nose plate, so are the same as the 91 worlds by RPM.

The rears I believe can be used for the narrow (cut) chassis or the uncut with longer drive shafts.

When I got them they were fitted to the uncut chassis with standard rear hangers. I have just tried them on the RPM 91 Worlds rear hangers and they fit. I don't know if they would need slight dremelling on the edge where they meet the chassis edge, but wouldn't of thought anything major if any.

Hope that helps....:thumbsup:


All times are GMT. The time now is 06:39 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com