batterys help, time for some new ones
 

HI all

im currently running core rc 5000maHr 30c/60c saddle packs but these are starting to get a slight bulge :thumbdown:
my fist set so probably around 11 months old ?

anyway what i wanted to ask was should i keep the same spec or go for higher discharge 80 / 100c ? would this be better for our club set up and would they be less prone to swelling as they can handle a higher discharge ?

i only run a speed passion R 8.5t and controller with standard spur and 24 pinion.

any advice would be welcome as im still not that savvy on kit yet.:confused:

well subject advice anyway :woot::D

Turnigy are fine, I ran them for a few years with no issues, these look like the latest one.

These links are for the worldwide shop, make sure you select the UK shop.

http://www.hobbyking.com/hobbyking/s...APPROVED_.html

Or

http://www.hobbyking.com/hobbyking/s...Approved_.html

http://www.hobbyking.com/hobbyking/s...ddle_Pack.html

Legend, thanks :thumbsup:

so 90c then !

i have a set of hardcase turnigy 30/60 and they havent flexed.
prices are good too for the ones you listed.

for staying on the page for two mins i just got a pop up offering the £42 set at £36 ! it just gets better :woot:

Need to make sure they are BRCA approved as well

noted Shaun and BRCA approved ordered :)