Hobbywing v3.1
 

Is it possible to disable the power down function on the 3.1?
I have a habit of holding my brake on from when I ran nitro and the esc keeps shutting down😂.

The setting isn't available off the program t but was wondering if you could do it through the PC?

Hi,


I'm not 100% but I think it's an option on the software.


MiCk B. :-)

It used to be an option but not with latest firmware.
What you can do is set brake side epa to 99% and that should do it.

its an option on xr10 and was on v3.1 via wifi module

So if I borrow a wifi module I should be able to turn it off?🤔

just checked my 3.1 and as posted its no longer there via wifi module and no option to disable it. had to turn trim rate down on brakes as its only activated on full brakes, not ideal. (done via wifi module)

oddly the option is on my xr10 still

Turned my brake epa down to 92%, this is the highest the EPA can be for it not to activate the shut down☹️