Quote:
|
1 Attachment(s)
Stuntmonk1,
Wow, you have nearly as much purple as my Cat2000/98/EC hybrid :-) Where have you been getting the new parts from? And those purple spacers between the shock mounts, where are those from!?! And the wing mounts? S. |
the spacers are modded motor heat sinks cool eh!
regards mitch's useless dad |
wing mounts are off current kc L1 Schumacher offroad range
unless my boy tells me different |
Hi buddy, yeah as my dad says, wing mounts are from a Schumacher cougar kc, they are a straight swap. The spacers are the heat sink fins off the motor heat sink chopped down and drilled out. Hope this helps.
Regards Mitch |
Yes, that is pretty cool, I may attempt that with my heat sink, though I'll probably loose a finger.
Alloy aerial holder and servo mounts... are they alloy equivalents of the standard schumacher ones? Stuart. |
Recent builds
6 Attachment(s)
Losi xx4 and my 2nd b3 nearly completed.
|
Both look cracking Mitcho………...:thumbsup:
|
Very nice mate :thumbsup:
|
Latest build
4 Attachment(s)
Carbon tub no2 nearing completion
|
Beautiful Mitcho. Love it...….:)
|
4 Attachment(s)
Another build just about there. Cost me an arm and a leg this one but it’s not very often a mint tomy infuser comes up for sale. I had previously purchased all the gpm parts and had them all re anodised ready to go, underside of the car doesn’t have a mark to it either which is rare. Photos don’t do this iconic car justice. Hope you guys like it:D:thumbsup:
|
Stunning, love it......:)
|
Procat
6 Attachment(s)
Finally got round to “finishing” my procat project. Still some additions I’d like to make but waiting till they pop up for sale. Not sure I’m ready to do another procat after this one, they really are a pain to work on😂 I did start with the intentions of doing it all black but then didn’t like the look halfway through, so I decided to do silver alloy too so it makes it stand out more. So the spec I’ve built this car too is:
Tanaplan Chasisis Top deck Sideplates Shock tower Rear camber link plate And steering rack Mms front and rear diffs Schumacher slipper Sjp rear wishbones Alloy eccentrics Alloy z bracket Alloy layshaft bearing holders Also just put some matched sanyo cells in along with a reedy mr series motor for period equipment. Thanks to Paul Brockbank for the recommendations! Just have to re wire a speedo before I can drop that in. But i like the way it sits at the moment. Doesn’t look too crowded in there at the moment imo. Not going to bother with a body either as it would be cruel to cover this up. Hope you guys approve, if anyone has or comes across some sjp top mounts or crashback mounts in white please give me a shout. Cheers Mitch |
Very cool mitch👍🏼.
Love to know where you guys find all the alloy bits and pieces, I’m still on the hunt for tanaplan or similar side plates for my project just don’t want to spend £370 for a whole buggy to get them😬 Keep up the good work. Adrian |
4 Attachment(s)
Thought I’d give in update since I have done so in a while, not been super busy but I’ve recently bought and purchased these 2 rb5 Vegas and b4.1 vega elite. One rb5 and the b4.1 have next to no scratches and have come up super tidy, just need to source an original body for a rb5 vega if anyone knows of one kicking about:thumbsup:
Mitch |
Vega shell
I think penguin design does a Vega shell
|
B4
4 Attachment(s)
Another pretty much new build complete. Team Associated B4 FT with nearly all the trinity parts. Just on the lookout for some rear hubs if anyone has some stashed away👍🏻
Also signed by the man himself Paul Bradby Enjoy |
Losi Xxx
4 Attachment(s)
Another one that I finished a while ago, a graphite Losi xxx with some trinity goodies to be used. No shelf queen but a tidy example at the least.
Enjoy |
All times are GMT. The time now is 07:32 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com