K2 v2 steering blocks and lipo options , transverse or inline ??
Ran my k2 yesterday (2nd time running a shuey ) at the Torch national , ran it in the inline set up , but a lot of the others run it in the std transverse set up .
What's people opinion on the inline setup , I found it a bit twitchy etc , still pretty happy with the car but just didn't feel %100 at ease with it. Also I ran the std blocks , but have a pair of the v2 blocks to try , any thoughts on these ? Cheers |
Quote:
I ran inline and V2 blocks. I've never ran across the chassis nor v1 blocks so difficult to give an opinion. I thought the car was good, but it was a bit dusty and struggling to get all the power down. Battery across the back may have helped. Yardy and McGhee both ran inline and V2 blocks. |
Quote:
I know steve brown runs it transverse with lcg saddle lipos to get the weight low down . Cheers |
I run inline shorty with v1 block as I do not have any v2 blocks. 10degree front and 7.5 alloy hubs and run this all the time and like it.
|
I am going to get my small bores out and try this setup this weekend as it seems very popular:-
http://site.petitrc.com/setup/schuma...2930/setup.jpg |
All times are GMT. The time now is 06:53 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com