Any news regarding the SX??
 

Hi there...

The Schumacher section seems to be dead for a while...

Matt and Mossy can you please give some news regarding the SX developpment...are you still running some mods (not shot by Jimmy yet) or everything s fixed now?

Some info regarding the production schedule...(if you have any)

Thanks a lot

Jean-Christophe

My car is as shot by Jimmy at our last national - because that was my car! (the NiMh one not LiPo).

Unfortunately, i don't have any confirmed timing, so i'm afraid i can't be of any help to you there.

so do i take it that theres no news then Matt, no info at all, no changes,etc anything not even a sniff,awww come on there must be something,

Any news on a 2wd ?

really hungry to know when will the Cat SX be available in the market.......:thumbsup:

yes an idea of how much longer would be great !
I don't want to rebuild my 3000 unless I really have to !

I heard september, im not sure how accurate that is but i know that the B team drivers still dont know when they are getting their cars :)

I heard end of May, then end of June, then end of July.....
I've cancelled my order now, as the reionals will be over before it comes out :thumbdown:

Ryan did you order the Lipo or the Nimh version ?

Lipo

http://www.racing-cars.com/images/pd...008_news_l.pdf

Mmmm nice :thumbsup:

is it just me or are the spares a tad pricey on there? the shock towers especially, i thought they would be cheaper as they seem use far less carbon than on other cars.

Was thinking that myself. Got my name down for a CAT SX.




Hope they're strong.........

They're 4mm thick and should be able to cope with some abuse.

I still don't see a release date, although on the Schumacher forum they say July, so should be really soon !

Has anyone seen the Lipo version? Its such a different layout it'll be interesting to see how it goes. The nimh looks very good on track!

Also, anyone know if saddle pack lipo&s will fit in the lipo version?

I hope so - I've got saddle pack Trakpower 4800's to squeeze in when I get my SX. They're not that much longer than the stick surely? I managed to fit them in a Durga with no problem.

I would be glad if you could post some pics on how you fit and secure this pack in you Durga, including connections.
On my side I have a bit of difficulties with the connectors that do not allow putting the body properly in place (problem with the height of the pack).

Thanks

Sent you a PM - Can you not solder the 4mm plug at 90 degrees to the wire, so the wire lays flat on the pack? Or use 2 battery bars with a 4mm plug at one end to go into the pack, and the ESC wire soldered at the other end - just to take the wire away from going directly into the pack at an angle that is preventing you from mounting the shell.

Thanks for your feedback and PM. Started the soldering work with wires at 90 degree with corally connectors. Finished 2 small extensions that allow me to use the carbon plate and aluminium screws coming from a TA05.
It should work! :thumbsup: