oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   I Made This ! (http://www.oople.com/forums/forumdisplay.php?f=25)
-   -   INSPIRE4 1/10th 4wd buggy (http://www.oople.com/forums/showthread.php?t=199190)

mro_racing aka Doorbell 28-08-2018 02:39 PM

INSPIRE4 1/10th 4wd buggy
 
1 Attachment(s)
hello this is a project I'm working on its called the INSPIRE4

+++ INSPIRE4 spec list +++
*Quick diff height adjustment, just loosen 3 screws on the chassis and slide a shim under the gearbox also easy to remove the whole diff case with the same 3 screws without affecting any of the suspension .
*Quick diff change without the need to remove the whole diff case or affecting any of the suspension.
*Low diffs front and rear. ...
*Left-right, front-rear wishbone are the same complainants.
*Front and rear bulkheads are the same
*The buggy has the lowest CG of any other rc buggy on the market.
*Adjustable front kick up and caster.
*Adjustable anti-squat plus the option to run pro-squat.
*Inboard suspension design with the dampers mounted as low as possible.
*Easy adjustable rocker ratio.
*Unique to the “INSPIRE4” a cross over quad rocker rear suspension system.
*Suspension geometry designed from scratch.
*Quick release spur gear.
*Chassis layout to achieve a 50/50 weight distribution (depending on electronics).
*Adjustable chassis flex
*Large angled side pods to increase ground clearance when the chassis rolls through the corners and decrease the chances of chassis rub.
*Flat chassis design
*No shock towers to disturb the air flow to the wings and body shell.
*CFD software used when designing the car.
*Minimal weight passed the front and rear axles.
*Wings mount perfectly over the centre line of the axles.

check out its facebook page https://www.facebook.com/MRO-Racing-757539404314286/

leeboy44 28-08-2018 05:42 PM

Ball or gear diffs?

When is the release of some cheeky photos :woot:

mro_racing aka Doorbell 29-08-2018 09:26 AM

Quote:

Originally Posted by leeboy44 (Post 991847)
Ball or gear diffs?

When is the release of some cheeky photos :woot:

the car is going to have geared diffs but a ball diff will be an optional part.
as soon as everything is in place for the kickstarter then all photos will be released but for the meantime ill be releasing body on photos with the most resent being posted on the Facebook page.

leeboy44 29-08-2018 01:55 PM

cant wait

gear diffs :thumbsup::thumbsup::thumbsup::thumbsup:

The_doctor 30-09-2018 03:39 AM

Yep put me down 4 2 kits straight off

daz75 30-09-2018 11:28 AM

Any news on what the kick start costs and target will be?

mro_racing aka Doorbell 02-10-2018 09:03 PM

Sorry not yet as waiting for quotes to come back.

Backforfun 14-02-2019 09:25 PM

Any updates

Origineelreclamebord 18-02-2019 07:22 AM

3 Attachment(s)
There are a few more pictures on their FB page, but I guess it still leaves a lot to the imagination...

adey 18-02-2019 09:50 AM

Reminds me of the predator cars. Any word of when it’s likely to be put into production?.

Origineelreclamebord 18-02-2019 08:34 PM

I only took a brief look, but I can't remember seeing anything about a release date just yet. I guess when it's time for that MRO Racing will post it on as many media as possible; from what I read they are looking to use Kickstarter to fund production.

micholix 11-08-2019 07:52 AM

Any news, or update of this car, i‘d be interested on a look under the hood?

brooksy 13-08-2019 03:19 PM

MRO 4wd
 
1 Attachment(s)
Last pic I’ve seen of it...

JohnM 14-08-2019 03:53 PM

Quote:

Originally Posted by micholix (Post 1004937)
Any news, or update of this car, i‘d be interested on a look under the hood?

It’s really, really nice with the top off, some very clever ideas in it:thumbsup:

schmacher 22-08-2019 03:12 AM

sorry,not preordering a damn thing until real pictures are released

Kev B 22-08-2019 08:31 AM

To understand this a brand new car, Unlike a few other in the past like the ORB which use a donor kit to start from this is a new set up. Following on Facebook this looks to be at the Prototype stage for testing and development ready to go to production. It looks like at that stage a kickstarter set up will be in place to help the final push to get the car out there.

scotty_big_flip 13-11-2019 04:05 PM

does sound the part that

daz75 02-04-2021 08:45 PM

Check out the pics

https://www.facebook.com/75753940431...?sfnsn=scwspmo


All times are GMT. The time now is 01:08 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com