oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Losi Racing (http://www.oople.com/forums/forumdisplay.php?f=17)
-   -   xx4 Rear hub (Problem) (http://www.oople.com/forums/showthread.php?t=28002)

rob84 29-07-2009 05:35 PM

xx4 Rear hub (Problem)
 
This is proberbly goin to make me sound thick, on my rear arms, im running standard xx4 graphite rear arms there are two holes for which the hinge pin will slot threw the hub carrier. which ones should be used?
If i try and use the outer hole the dive shaft does not reach the outdrives and if i use the inner one they only just sit inside.
are my drive shafts wrong, or is it the rear arms?
cheers Rob

Belsten 29-07-2009 05:54 PM

Inner hole mate

super__dan 29-07-2009 09:18 PM

And potentially cut the outer one off as they rub on certain wheels (AE maybe???)

The outer hole is from the BK2 geometry

ashleyb4 29-07-2009 10:05 PM

Yea if you use AE wheels you have to remove some material off the end of the wishbone. Are you using CVD's or the std dogbones?

A

rob84 30-07-2009 03:06 PM

std bones mate

Ferret 31-07-2009 05:44 PM

Looks like you have BK2 arms, their inner hole is the same distance as the XX4 arms which has only a single hole.

If you are still having problems when you use the inner holes, make sure that you have the correct hub carriers.


All times are GMT. The time now is 10:46 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com