Shock Build Finshed !!
2 Attachment(s)
So the final part,
Shocks filled with Tamiya Yellow Soft oil...:D Actually they feel really good. New Blue adjusters with New orings fitted, New white TRF Springs (RED) all round as these came in the kit. Caps fitted and vented. Ready for the TRF511 Now.....:thumbsup: Awaiting parts to turn up to complete the build. As soon as these turn up, I will post pictures......:) Click to enlarge Pictures. |
Quote:
You don't have OCD by any chance Mark..! 😂......if I did that, one sneeze and the parts would be all over the room..! 😱😂 |
Quote:
|
Dust Covers
1 Attachment(s)
Just had the Original Tamiya Dust Covers turn up.......:D
Big job for later to install these...:) Click to enlarge.... |
Dust Covers !!
2 Attachment(s)
Well it was tuff, but I managed it.
Dust Covers fitted to the complete TRF511.....:) Click to enlarge.. |
That is looking really great Mark, as to be expected from you...! 👍😄
|
Up-Date
Hi all,
Just an up-date. The parts I'm waiting for from Tamiya Japan, should be with me over the weekend or early next week. Once in my hands, I will be able to complete the TRF511.....:) |
Inspiring thread.
I've been a Tamiya fanboy of the TRF511 since it first came out. Since then, I've grown my collection to include:
AFAIK, that's the full list. I'll post pics after the weekend to let everyone have a drool. The 503 is the only runner, but then, why wouldn't you have at least one of them running? I kept a lot of spares for it, so it's going to be a few years before it's "halted"... |
Nice one Donutt.....:thumbsup:
Lets see your Tamiya TRF Buggies...........:) |
Just had the message.
Parts Ive been waiting for are here.....:D As soon as I have them, should be Friday, I will complete the TRF511....:thumbsup: |
Quote:
I'll get that done at the weekend... |
:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup:
|
Here's my TRF Family from DB01 to TRF503.
From L to R: DB02, TRF502, TRF503, TRF511, DB01, TRF501 http://tamiya.iannetta.co.uk/images/20180607_144301.jpg I've put together a small gallery webiste to show them in closer detail. http://tamiya.iannetta.co.uk/ |
Nice Donutt, Very nice.........:thumbsup:
|
My wait is over. I have the parts I've been waiting for, so later I will get some pictures up and will be able to complete the TRF511.....:thumbsup:
|
3 Attachment(s)
Finally,, here's the parts that I've been waiting for.
Tamiya TRF511 Genuine Front Shock Tower. Tamiya TRF511 Genuine Rear Shock Tower. Tamiya TRF511 Genuine Decal Set. I will install towers and other parts later......:) CLICK TO ENLARGE PICTURES.... |
Front Shock Tower Install.
3 Attachment(s)
Front shock tower, New screws and Tamiya Alloy Shock Bushings. Finally fitted to the Front of TRF511...........:)
CLICK TO ENLARGE.... |
Rear Shock Tower Install..
4 Attachment(s)
Rear shock tower, New screws and Tamiya Alloy Shock Bushings. Fitted to the Rear of the TRF511.. Tamiya blue nuts ready for the New shock install next....:thumbsup:
CLICK TO ENLARGE PICTURES.. |
Shocks fitted..
2 Attachment(s)
Front and Rear New TRF Aeration Shocks fitted, with New screws and Blue Nuts and Washers..
CLICK TO ENLARGE PICTURES...... |
Rear Wing mounts..
4 Attachment(s)
New wing mounts and New body mount installed. Also fitted is a New aerial mount and New Servo mounts. Tamiya blue Exotek wing buttons ready for the New wing...
I also have an original New blue Tamiya kit aerial tube which will be fitted later.:) CLICK TO ENLARGE PICTURES... |
All times are GMT. The time now is 09:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com