oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   I Made This ! (http://www.oople.com/forums/forumdisplay.php?f=25)
-   -   Conversion from Tamiya chassis M-02 (rear wheel drive) to M-01 (front wheel drive) (http://www.oople.com/forums/showthread.php?t=210384)

korreka 06-05-2022 02:13 PM

Conversion from Tamiya chassis M-02 (rear wheel drive) to M-01 (front wheel drive)
 
The front-wheel drive M-01 and rear-wheel drive M-02 chassis are symmetrical; Depending on where you mount certain parts, they can be converted from one to the other.

https://imgfz.com/i/aFHSIuK.png


The chassis I have is a 239mm M-02L and I want to convert it to an M-01 with the same parts.

https://blogger.googleusercontent.co...DSCN8358-1.jpg


Hubs, steering arms, bumpers and body mounts need to be removed and swapped.

https://blogger.googleusercontent.co...DSCN8360-1.jpg


The wheels shafts are also swapped:

https://blogger.googleusercontent.co...DSCN8362-1.jpg


the "M-01L" already assembled:

https://blogger.googleusercontent.co...DSCN8363-1.jpg


The steering servo rod needs to be lengthened as the servo is now located behind the battery. For this I have used some electronic circuit board spacers that also had the same thread as the rod:

https://blogger.googleusercontent.co...DSCN8364-1.jpg

Tests and video:

https://youtu.be/UI4emLlQf7A




Spanish thread here: http://reparar-cochesrc.blogspot.com/2022/04/convierte-chasis-tamiya-m-02-traccion.html


All times are GMT. The time now is 01:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
oOple.com