Atomised B44 starting set up for stotfold
 

Could someone post a starting setup for a AC B44 stotfold please.
Thanks

Has anyone actually run an AC B44 there yet?

Translate this onto an Atomized B44

http://atomic-carbon.gforceimages.ne...15-06-2007.jpg

then make the following changes

40wt front oil
35wt rear oil
orange rear pistons
pink rear spring
outside hole for front shock on wishbone
middle hold on front tower (shock)
#1 on rear tower (shock)

the inner camber link location used is the B44 'inner' both front and rear
outside hole on the B44 front caster block for the camber link

that should be about right if its dry, if its wet drop 5wt on oil all round.

Chris is this what you finished on @ Southport ??

Pretty much, but I will hopefully be using all 4 driveshafts unlike most of the runs at southport :rolleyes:

Ok thanks Chris