Quote:
Originally Posted by Ubiquitous
Yes, I can move the lipo all the way up against the front mount and all the way up against the rear mount.
For the full front position, you need the belt tensioner to raise the belt so it does not rub against the lipo. For the full rear, you need to Dremel the deck mount in order to be able to slide the lipo underneath or get my custom deck mount. I opened a shop on Shapeways and put my "lipo tray kit" and "rear deck + belt tensioner kit". I also added short descriptions and pictures:
https://www.shapeways.com/product/8M...li=marketplace
https://www.shapeways.com/product/U5...li=marketplace |
OK now I'm going to buy but my current rear top deck mount is 3mm higher, I raised the top deck up by 3mm for the Lipo and also had to raise the middle deck support and the front gearbox top so can you do the middle deck tensioner with an additional 3mm in height, so adding to the bottom?