I run the 22 2.0 driveshafts in the back of mine. You do also need the hubs and wishbones. It was a mod that was quite popular to improve handling. Pretty sure that the 22 series hubs wishbones and driveshafts will fit. You will need to shim the wishbone pivot and maybe put a washer behind the driveshaft to make sure it is long enough to not pop out of the outdrive.
In terms of belts. You can get the tough racing belts from ebay. They are much cheaper. But you cant be as brutal with them. So wind off the slipper a little and don't use crazy motor settings.
Let me know if you are still struggling. And I can see what I have. I dont check oople often. So drop me a PM if nobody comes through.
__________________
Tom
TLR 22-4 2.0, TLR 22 5.0 AC Elite,
Kindly Supported by Trackside Spares, TLR, Spektrum and Horizon Hobby
|