XXX cr Worksop Indoor setup
Front
Toe 0 deg
Ride Height Wishbones level
Camber 1 deg
Caster Std
Oil 32.5
Piston Orange
Spring Blue
Limiters None
Spindle Height Low
Bump Steer spacers 0
Camber Link 2A
Shock Location 3 Middle
VLA Long
Rear
Toe Std
Ride Height Driveshafts just above level
Camber 1 deg
Rear Hub Spacing Middle
Oil 25
Piston Red
Spring Pink
Limiters None
Camber Link 2E
Shock Location 3 Middle
VLA Short
Notes
2 gold washers under inner camber link position on the front
3 gold washers under outer camber link position on the rear
35g lead putty in the front bulkhead
LIPO weighted up to normal NiMH weight ie about 190g added
Use Standard Losi front wing
Thats what i used at Worksop car was very good.
|