View Single Post
  #3  
Old 10-05-2010
Nick Nick is offline
Senior Member
 
Join Date: Aug 2009
Location: Skegness Lincolnshire
Posts: 398
Send a message via MSN to Nick Send a message via Skype™ to Nick
Default

Quote:
Originally Posted by Danny McGee View Post
2wd was as follows.
Front
Oil – 35
Piston – Red
Spring – Black
No Limiters, unscrewed 2 turns
DM Tower, inside hole
Outside on wishbone
2-B with 3 gold washers

Rear
Oil -27.5
Piston – Red
Spring – Pink (no Paint)
No limiters
Inside on tower
Old style rear end with 1degree hubs. So 4 deg in total
Extra hole drilled in wishbone on inside or inner hole.
Cut off the outside hole of the old style wishbones and use inner hole
A on 1deg hub
Short Wheel base
2 on the tower camber link

Weight
Rude Bits, T plate, Under battery plate, Battery Straps, under servo plate (thin) brass bulkhead

Tyres: Yellow SPIKES half hard foam in front and heard rear foam both losi

Motor Losi 7.5 geared 23/78

Speedo – Mamba with CHEAT set to 12,000 to 15,000.

Cheers

Danny
did you run the CR or old pivot block Danny? Ps gearbox cases should be done early next week
Reply With Quote