Quote:
Originally Posted by fastinfastout
I heard the original 4wd ate up drive/bevel gears easily, has this problem been addressed?
also, if I buy the old plastic version 4wd, how do I know that the bevel gears are the updated ones, assuming that they have fixed the problem.
|
Not that im aware of. So long as the gears are properly shimmed you shouldn't have any trouble. I did strip a front gear but that is because I cracked the front transmission case and I decided to keep racing with it
. My rear transmission is the original is running just fine.
The problem is that the kit only comes with 4 shims so you need to order an extra pack. Personally I use 3 front/rear and that gives a good mesh