Faskolor is perfectly good paint, I use most that combined with Createx AutoAir paints.
If you were doing that job I would start with the tamiya rattle can and get that down and sealed first, ( you should test on some scrap lexan that if you put chrome over the top it will be okay ), to be honest though as long as you
dust the chrome on after you'll be fine ! Back the chrome with Faskolor black then lay down your other Faskolors and you'll be fine.
No Faskolor Pearl Charcoal is too dark. I would go for something like AutoAir Pearlized Black (4314)
(CLICKY) the swatch on screen looks way way darker than it is.
Hope that helps, post up if you get and problems and I'm sure one of us can answer to help you out.