Quote:
Originally Posted by Gunthar Guntharsėn
What about the RF hanger? The 3 degree antisquat RF hanger is 2mm taller than the 0 degree. So with this mod would you have 3 degrees antisquat minimum (using the 0 degree RF hanger). I presume most people usually run less (I normally about 2 degrees).
|
http://www.exotekracing.com/dex210-r...ith-shims-lrc/
There you go. You could also machine a plastic or alu one lower, but many alu ones don't have a lot of flesh around the outside mounts/screw holes, and the plastic one is not ideal to take material off of.
Also worth noting, the RDRP LRC kit only lowers the rear, the RF hanger is the same as the 0 degrees anti-squat one!