I've got one on my 210.
It didn't work well with the stock white pads on super grippy astro with a 6.5t. No matter how much I tightened it there was still too much slip. They are really meant for US dirt tracks and 'stock' motors.
But switching to a mix of 2 red (high friction) and 1 white seems perfect. With that combination there is a good range of adjustment and the slipper is smooth and progressive.
However the gear cover on mine doesn't fit. It rubs the end of the slipper. I've spaced it out with a couple of 2mm washers so that doesn't happen, but of course that leaves a small gap for sand to get in and mash the spur gear. You get 2 spurs in the kit, and you'll need that spare because of course its totally unlike anyone elses gears and few places stock them.
Its certainly an improvement, though whether it was worth losing spur gear compatibility with my 410 and Cobra 4210 is debatable.
__________________
Yz4 - Yz2
DEX210 - Cobra 4210- DEX410
RC10 Team - Manta Ray - RC10T
Mini Trophy - Blizzard - Wheely King
Tz4 - GT24B
BMRCC
Emergency back-up race controller
(but only if nobody better is available)
|