Quote:
Originally Posted by Welshy40
Dan,
I used the sc10 high torque pads and yes on both sides of the pad. You could use the stock spur but need to cut the sc10 pads to the same size to the zxr mk1 slipper pad design.
No worries will get you a couple and is worth while having a spare especially when you race on dirt. I would recomend using tape around your gear cover to stop dirt getting into that area.
|
OK that makes sense, seeing as you still use the original kyosho clutch hubs that means that you don't really use all of the slipper pad which probably explains why they wore out quickly.
Appreciate your help with the spurs