New setup for the truck and result from my first race ever with the 1/18 cars
As you can see in the forum before this one, Ottoswe was the big winner @ Halmstad Indörrs 1/18 OR cup 1/11-2009 he is so fast that it is almost unbelievable.
Track Type Description: Smooth,technical and fast
+Front+
Shocks: Alu
Shock Oils: 1500w
Pistons: 2
Spring: Yellow hard
Preload: 2mm
Internal Droop Spacers: 5mm
Shock Angles: (alu tower,arms just under level)
Shock angle bottom arms: Outer
Shock angle top arms: Outer
Toe In/Out: 1 out
Swaybars:
Sway Bars: On
Sway Bar MM thickness: 1.5mm
Tires: Foam
Compound/Type: UFRA 42
Dimensions: 55mm/18mm
Traction compound: Carpetjack
CA: Yes edge
Micell: front diff hard
+Rear+
Shocks: Alu
Shock Oils: 1000w
Pistons: 2
Spring: Black medium
Preload: 5mm
Internal Droop Spacers: 7mm
Shock Angles: (Alu tower)
Shock angle bottom arms: Outer
Shock angle top arms: 3rd from top
Toe In: 1 in
Swaybars: Yes
Sway Bars: On
Sway Bar MM thickness: Stock
Tires: Foam
Compound/Type: UFRA 42
Dimensions: 55mm/23mm
Traction compound:Carpetjack
CA: Edge
Micell: middle diff
+Chassis+
Weight Balance or layout: Motor,Esc and servo on rightside, Rx on front left
Micell: Xray M18T Pro
+Electronics+
Motor:eZrun 7800 rpm/v
Gearing:Stock/16T
Specifics Notes:Alu rear and front carriers - NT hex - Alu towers - XXX4 wing mount. Using M18T Pro parts on the truck.Stock lid, Tamiya frog ving
I qualified to 1/4 final and bumped up to Semi, that was something that i did´nt expected at all.. finished 16th of over 56 starting