View Single Post
Old 07-04-2008
markwilliamson2001's Avatar
markwilliamson2001 markwilliamson2001 is offline
Mad Member
Join Date: Apr 2006
Location: Ledbury, Herefordshire
Posts: 1,889
Send a message via MSN to markwilliamson2001

Sounds like you have too much oil in the shocks...

Try pulling the shaft fully out, then taking out the bleed screw, and pusing the shaft back in until it stops (or according to the instructions).

Then replace the bleed screw, and pull the shaft fully out. Push the shock shaft in and out about 3 times, then push the shaft fully home into the body. It should then push out very slightly and slowly. (4-6mm)

:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx ::
:: Paint By Turnip Paint ::
Reply With Quote