've been doing some homework
: reading on the Tekin-site.
Quote:
|
...Because of the differences in magnets a 3 turn sensorless motor will not compare closely with a 3.5 turn sensored. For example, the Tekin Redline 362 sensorless is a 3 turn that rates at 6200 kV, while the Tekin Redline 3.5 sensored is a 3.5 turn that rates at 8000kV...
|
a higher kV means more rpms, so a Tekin sensored 3.5 is much more powerfull then the sensorless 3?
Do I understand this correctly?