This is what i ran at Petit, Chris Bowater ran the same in the A final with me :
Front -
Track Washers - 1mm front and back
Roll Bar - 1.2
Shock Position Mount - Middle
Shock Position Wishbone - Middle
Front Rake - 10 Degrees
Front Yoke - Alloy 7.5 degrees (kit is 10 degrees)
Washers - 3.5mm
Front Link Bracket - 43mm
Washers on Hub - 0
Rear -
Wheel Base - Short
Toe In - 1.5mm Rear, .5mm front
Anti Squat Washers - 1.5mm Rear, 0.5mm Front
Rear Link Bracket - 37.5mm
Washers - 4mm
Shock Position Mount - Middle
Shock Position Wishbone - Inside
Hub Postion - Outside
Roll Bar - 1.2
Shocks
Front -
40wt on 3 Holes
Schumacher Blue Springs
Diaphragm - Centre cut out and removed
Ride Height - Just below Wishbones level
Rear -
35wt on 3 Holes
Schumacher Grey Springs
Diaphragm - Centre cut out and removed
Ride Height - Just below Wishbones level
Transmission-
Rear Diff Height - High
Front Diff Height - High
Layshaft Pulley - Pin Through
Front Drive - Diff
Gearing - 83 x 21 on Speed Passion 5.5
Internal Ratio - 32 Tooth Pulley
Tyres
Yellow Mini Pin all round, Schumacher Green Inserts.
Hope this helps.
Si
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC
|