View Single Post
  #4  
Old 12-12-2018
xfactor's Avatar
xfactor xfactor is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Aug 2010
Location: The Place to be seen. Beduff.
Posts: 2,625
Default GearBox Parts YZ2-4Gear

After using the 4-gear YZ2 Gearbox on my TRF201 XMW Low Rider, I have decided to use it again. The way it ran was perfect for my driving style, so will be using it again for this build.

The 4-Gear motor plate also allows for the support to the chassis to aid strength and protect the gearbox.

So here is the list of YZ2 Parts I will be using........

Z2-304 Motor Plate 4-gear
Z2-018 Rear Tower
Z2-303 Idler Shafts x2
Z2-503 Idler Gear x2
Z2-302 4-Gear Gearbox
Z2-303TA LayShaft
Z2-670VP Slipper Plate x2
Z2-018M Water Fall and Parts
Z2-018M2 Worlds Water Fall
B2-670S Slipper Spring
Z2-001W Wing Mounts
Z2-300RUW Alloy Ballstud Mount (rear).
Alloy Brace from Motor Plate to Chassis.

I will also be using the RDRP Drilled Spur Gear 78t.

Also to mention as well, the Diffs (Ball & Gear) from the TRF211XM Kit will fit the YZ2 Gearbox with 0.5 shims either side with the correct amount of side to side movement due to being slightly narrower than the YZ2 Diffs. TRF diffs will be used..

Hope that helps....

__________________
http://www.oople.com/forums/showthread.php?t=83767 TRADER FEEDBACK

**** 5 Metres Speed Swimming Champion 1976****

Last edited by xfactor; 12-12-2018 at 06:31 PM.
Reply With Quote