Ball stud mount, wishbones, hinge pin mount
I went for the High Traction rear wishbones as I prefer how they handle compared to the kit rears. Also a added bonus is they are pre-dremelled for the outdrive and have mounting holes for the shocks both sides.
I have removed 2mm on the front of the wishbone and added a 2mm blue washer to the rear of the wishbone to shorten the wheel base slightly.
The rear hinge pin mount and anti-squat washer needed about 3mm-4mm filing down as not to hit the gearbox screws, nothing major at all.
CLICK TO ENLARGE PICTURES........
|