Had another run today, had a few teething problems early on, like the screws that hold the front hubs on coming loose. but its an easy fix.
The car felt very safe early on, too safe to be quick. i changed from a 3 deg toe block back to kit and the car was suprisingly good. The track was super slippy(batley) and i was running BB green spikes.
Right now the setup is
Front, 40wt losi green spring, red piston
Inner link on hub, and top inner on shock tower.
0.5 camber
Toe 0 deg
Rear 32.5 wt pink spring blue piston (drilled aero #54)
Std toe
Camber link 3/4 way down on tower, middle on hub
Camber 0.5
Ride height is the usual drive shafts level on rear and wishbones level up front,
The car feels good, i think the car will be awesome when it gets a set of minispikes on it. To give it some side bite. Its very easy to drive it for 5 mins without it biting you.
I am also using a 1 way diff.
slipper setup: with an allen key
