View Single Post
Old 14-08-2015
luniemiester's Avatar
luniemiester luniemiester is offline
Senior Member
Join Date: Jul 2009
Location: Birmingham UK
Posts: 377

Originally Posted by arceye View Post
That pic was with the droop screws about 2.5 mm out from the rear wishbone which pushed it all up. So that ride height was 20mm. Just loosened it all off and it measures 25mm. So my 28mm was a little ott sorry.
I'm getting confused. You say the first picture you put up the ride height was 20 but now you've loosened it off its gone up to 25mm?

Have you got the head of the droop screw wound all the way in so it is touching the arm as you look from underneath

Also the first picture shows the shocks with the rubber boots on but second picture with ruler they're missing. Have you changed anything between the pictures?

If you have the kit spring then measure the red and blue side by side. They should be almost same length
Attached Images
File Type: jpg image.jpg (140.1 KB, 7 views)
Luniemiester drives:

Schumacher KF2SE
Hobbywing - Reedy
Sanwa MT-4S
Savox servos
Nanotech batteries

Kits and parts supplied by:

My Feedback thread:

Last edited by luniemiester; 14-08-2015 at 10:57 PM.
Reply With Quote