XXX-CR Indoor Set-Up
This is my finishing set-up from last week's York Regional. The car was very good.
Front
Toe - 0
Ride Height – Chassis Level With Rear
Camber - -1
Caster - Std
Sway Bar - None
Oil - 40
Piston - Red
Spring - Black
Limiters - None
Spindle Location - Low
Steering Ackerman – Rack
Bump Steer - 0
Camber Link - 2B
Shock Location - 4 Inside
VLA – Long
Front Wing - Yes
Notes - 15gramms in bulkhead
Rear
Toe-In - 3 inboard
Pivot Support - Std
Rear Hub Spacing – Middle
Driveshafts/Outdrives – Steel Dogbones/Steel Outdrives
Ride Height - Driveshafts Level
Sway Bar - None
Oil - 35
Piston - Blue
Spring – Yellow – 1.5 coils
Limiters - Inside 1x B Spacer - Outside 0
Camber Link – 2A 0 washers
Shock Location - 4 Middle
VLA - Long
Wing Position - High
Notes -
Battery Position – Forward
Speedo – LRP QC2
Settings – Factory Default
Motor – Peak Vantage 10x2
Gearing – 20/78
Any Questions just ask.
|