The stiffness of the aluminium T-Plate has allowed me to try a different layout as shown on the attached. I'm still using my pre-Evo version of the T-Plate and gearbox, grafted to the Evo chassis so you may need a slimmer ESC to do the same with the Evo box.
The HBI T-Plate has been clocking up some good results in Europe, the latest being Oskar Levin's domination of the Swedish National:
https://www.facebook.com/teamrchobby...type=1&theater
Prior to that Nico Risser gave similar treatment to the oposition at Round 3 of the Belgian/Dutch Championship:
https://www.facebook.com/69584277717...type=1&theater
and William White came out on top at Round 1 of the Irish National Championship:
https://www.facebook.com/photo.php?f...type=1&theater
The T-Plate uses standard TM4 inserts to give one step up and one step down from the standard anti-squat and the use of Team-C's rear hanger provides similar adjustment about the standard roll-centre adjustment.
A special has been commissioned by William White to move the front inserts 3mm further apart, enabling the maximum track width to be obtained with the gullwing wishbones.