[Dadio]

The new one way roller hub/knuckle assembly with unmodified Kyosho Scorpion 2014 rear axles , it adds 3mm track on each side so the car is 6 mm wider , im printing the rear Scorpion axle compatible hubs with additional width to match the front.




And here's the rear Mono Shock Cantilever mount , sorry about the hodge podge of screws i need to get more , always more .



I'm fairly happy with the way it mounts but it will probably be only for shelf or light use , I'm planning on a stronger version that has a yoke on the ends for mounting the bell cranks and the same for shock mountings on the bell cranks .