View Single Post
  #4  
Old 15-02-2012
(off)roadrunner's Avatar
(off)roadrunner (off)roadrunner is offline
Member
 
Join Date: Apr 2011
Location: rutland
Posts: 179
Default

check the voltage cut offs are set correctly (i belive standard is disabled)

also make sure the gearing is correct as it does sound like a cut off issue could be motor temperature as the lrp motors are linked to the lrp esc so that the esc knows the temperature of the motor not only the esc, so it could be a case of motor getting to hot and causing the esc to limit power, would tie in with how you mentioned that it changed when you went from the 5.5 to the 6.5 when it lasted longer but still occured so could be because the 6.5 took longer to reach the cut off temp.

also think i read somewhere that you have to use the 0dg timing insert in the motor plate when running the esc with timing otherwise it could cause overheating issues too,
Reply With Quote