Quote:
Originally Posted by andrewc
Hi all
Getting confused with parts/numbers.
Bmax4iii with shorty chassis, it's currently got a gun metal green rear prop shaft, (slipper to rear diff) which I believe is the light weight version?
It's destroyed the CV joint onto rear diff input shaft (also alloy version), so I'm looking to replace the whole rear prop shaft including input shaft.
Which part do I need? I can't locate a number for the alloy version...to be honest I'd happily put a standard rear prop in it but I'm unsure which one I need? Did the shorter chassis move the slipper and therefore have a different length rear shaft? Or did they extend he slipper output to accommodate the extra length?
And one seems to be listed as a 'c-clip' rear shaft?!
Any help/advice appreciated.
Andrew
|
The shorty chassis swapped the front and rear propshafts, so you can use the part code for the front (or rear) propshaft in the original kit B4-010B I think. The shorter one is the same length as the front CVD's, from memory.
I may have the short and long shafts mixed up here though, as it all depends which way you have the motor pod rotated, as to which one at the rear you have broken.
The alloy lightweight ones were an option.
B4-CB68A - 68mm
B4-CB76A - 76mm
Kit parts:
BM-010CRC - Front - Short
B4-010CR - Rear - Long
The gear shaft end - B4-303 and B4-303A.
The CVD pin and ring - BM-010TPC
So if you are running the shorty pack, you may have the short shaft to rear, so 68mm.
MB models still carry all the bits you need.