Quote:
Originally Posted by Welshy40
OK now that's basically what I thought when I did mine, will post pics later when I get five minutes.
Yes please, would be nice to test it, think it resolves a big issue and may say more simpler than my tensioner bolted to my Lipo tray.
I also have already designed and tested my tray but you may want to tweak your design a bit on the Lipo brace as would be a good idea to be able to move the Lipo up and down the chassis as a weight as that's how I've been using it or is that what those screw holes are being used for and if so think you've almost nailed the design perfectly. Actually can you move the Lipo all the way so up against the mount?
|
Yes, I can move the lipo all the way up against the front mount and all the way up against the rear mount.
For the full front position, you need the belt tensioner to raise the belt so it does not rub against the lipo. For the full rear, you need to Dremel the deck mount in order to be able to slide the lipo underneath or get my custom deck mount. I opened a shop on Shapeways and put my "lipo tray kit" and "rear deck + belt tensioner kit". I also added short descriptions and pictures:
https://www.shapeways.com/product/8M...li=marketplace
https://www.shapeways.com/product/U5...li=marketplace