Also worth trying using the extra inner hole on the rear wishbone, i.e drill a new hole 9mm in from the center of the current inside hole on the wishbone, then mount the shock on the inner hole on the tower, you will have to break out Mr Dremel to remove a little bit of CF from the tower as the shocks will catch a little bit, on the rear i then use 30wt red pistons and pink springs, i know a few people that use this setup as well as myself and they say its a big improvement
For info at the front i use 35wt red piston black springs, middle on tower and outer on the wishbone. Some people goto a blue spring.