If your motor is the newer red one then these are the settings:
motor - full timing (endbell rotated as far anticlockwise as it will go.
esc - boost 0, turbo 0, 1st and 2nd stage punch 30, 1st and 2nd stage brake 25, drag brake 0. Leave other settings alone. *You need the program card to do this.
gearing - around 68mmpr. That's a 30t pinion, 70t spur and 50mm tyres. Go up 1t on the pinion for every 1.5mm drop in tyre diameter
Last edited by 200sx; 23-02-2015 at 05:02 PM.
|