Hi guys!
I'm running Modified in Denmark. Lets share useful setup tips with eachother.
Here's what i generally work with on my car. I'm running short links All around on the bulkheads . Car reacts quicker without being too wild. Camber 1.5 All around, sometime 2 in the rear . Generally always running flat on the rollcentre . Adding 0.5 mm shims on highbite tracks to prevent the car from digging too much into the carpet. It makes it float a bit more. I've run a few Months with a wider car. Made it 1mm wider on the pivot inserts. This settles the car down and works good on highbite tracks. You are able to push very hard !
I'm starting to run narrow (std) width on the front and keep the rear wide. I think it gives a Nice aggressive front with stable rear end.
Splitted suspension blocks in the front are a Nice option for added Flex and steering.
I always run without the 4 screws above the spur layshaft.
Feel free to ask me about the car for setup tips. I'll see if i can help you, or if you can help me
Hope this is useful for some of you .