As requested Mikey
Associated B44. Not as comprehensive as the set-ups above because it doesn't deviate too much from kit set-up
(and it was the first time I'd run it - but it will be my starting set-up for the Nat at EPR coming up)
Front camber link kit
No.2 piston, 35wt oil, green spring, 1 droop limiter,
Outside hole on w/bone, inside hole on tower
Driveshafts level
Rear camber link as kit
No.1 piston, 25wt oil, green spring, 2 droop limiters
Inside hole on w/bone, inside hole on tower
Driveshafts level
Long wheelbase
Slipper set quite loose
Worn Schuey yellows all round (with the outside row cut-off the front)
Rudebits battery tray and straps.
Novak 6.5t motor geared at 21/84
Robitronic Speedstar 3.5 speedo
Had moved the rear shocks to the back of the rear w/bones but seems to make pretty much no difference at all.