View Single Post
  #9  
Old 19-10-2014
Origineelreclamebord's Avatar
Origineelreclamebord Origineelreclamebord is offline
Mad Member
 
Join Date: Sep 2010
Location: Netherlands
Posts: 1,571
Default

Quote:
Originally Posted by DCM View Post
As you're 3D Printing, the caster blocks, why don't you just mould the angle onto them?
Hehe that's a good plan indeed I looked over that while making the model for these, the current parts I offer have the angles printed on them if applicable.

Edit: @alex97 - Yes, B5M wing mounts with screw mountings instead of clip mountings. First of all, it takes out the slop that you have with the standard wing and mount. Moreover, no clips can shoot off, so your wing won't come off unless you do so on the pit table. Of course you can also use thicker wings without a tight fit of the clips, and last but not least, the cap on the top of the wing offers good support to the wing that the solution from the kit is missing.
__________________


3D Printing Upgrade Parts - FF210 Buggy

Last edited by Origineelreclamebord; 19-10-2014 at 05:09 PM.
Reply With Quote