Another build
Hi
My car is built up to the point of the shocks. No paint on the body yet.
Diff Bolts:
I suggest to clean the bolt thread then screw into the nut and out before assembling in the diff.
Also squeese the spring in pliers before assembly.
Do not overtighten the diff bolt before backing off 1/4 turn. As long as the diff spur does not rotate as decribed in the check procedure.
It will need checking after running anyway.
Good build so far.
Any tips or points to watch out for with the shocks and setup?
I will be running on loose dusty tracks.
Jeff
|