Quote:
Originally Posted by adey
I have done so. I am not referring to movement there. The issue is the diff bearing housing that is used to adjust the diff height is not a tight fit in the gearbox. It looks like a moulding issue.
|
try it with the other eccentrics to see if you have the same problem. might give you some idea to which part is not right
__________________
STARTED IN FEBRUARY 2018
LEARN'T WITH A DEX210,
CONTINUED MY EDUCATION WITH A TLR 22 4.0
BECAME BATLEY BUGGY CLUB COMMITTEE MEMBER
GOT A KC TO WHILST WAITING FOR THE LAYDOWN
NOW DRIVING A COUGAR LAYDOWN
KC CONVERTED TO KD FOR THE WET
|