V2 firmware and software is now up on the Losi website.
http://www.losi.com/Support/XcelorinDownloads.aspx
Install procedure:
Download V2 of software + the firmware
Install programme (if you have AVG disable real time scanning)
Plug in USB adaptor, it should install itself
UNPLUG batteries!
Open programme
Make sure both lights are green in the programme
Click update firmware
Locate file, if you cant find it put *.lsc in and it should pop up
Let programme update speedo
Click commands and then reset to factory defaults
Now click read settings
Now setup as you want
My setup:
Forward no reverse
Throttle Limit: 0%
Reverse limit: 100%
Motor Timing: Normal
Initial Acc: Medium
Braking %: 30%
Drag brake: 12%
Deadband: 3